Anti-Lock Control - Anti-Lock Contro

Diagnosis and Testing

Refer to Wiring Diagrams Section 206-09A, for schematic and connector information.

General Equipment

diagnostic equipment

Inspection and Verification

1. Verify the customer concern.

2. Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

Mechanical	Electrical
Wheel speed sensor(s) Wheel speed sensor ring(s)	Fuse(s) Electrical connector(s) Wiring harness(s).

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

4. If the cause is not visually evident, connect the Ford diagnostic equipment to the data link connector and select the vehicle to be tested from the diagnostic tool menu.