BOX BUTTERFLY CONTROLE FEATURES
FEATURES Operating the control of the control box butterfly:
1 Check the manual operation of the motorized throttle Turn the key to OFF position Manually move the throttle fully open position and check that it rotates regularly. Remove finger throttle (1) and make sure it returns to its preset position (open 7 (2) in relation to its fully closed position valve by rotating regularly under the combined action of the spring and the spring of opening). Manually move the throttle in the fully closed position and make sure it rotates regularly. Remove your finger and make sure it returns to its preset position. Go to step 2
the result of step 1
Replace the motorized throttle See: THROTTLE BODY WITH INTERGRAL MDS - RR (Info)
2 Check the manual operation of the motorized throttle Turn the key in the ON position in less than 5 seconds Gradually depress the accelerator pedal and check that the butterfly continues to rotate regularly until it is fully opened. Release the accelerator pedal and check that the throttle returns to its preset position.
the result of step 2 Proceed to Step 3
3 Control of the resistance of the throttle actuator Turn the key to OFF position Disconnect the throttle motor. Using the apparatus of Ford test mode ohmmeter, measure the resistance between terminals 3 and 5 of the throttle actuator and make sure that the resistance is about 2 ohms ± 10% at 20 ° C See: PETROL ENGINES ELECTRONIC MANAGEMENT (Content)
the result "of step 3
Replace the motorized throttle See: THROTTLE BODY WITH INTERGRAL MDS - RR (Info)
1 Check the manual operation of the motorized throttle Turn the key to OFF position Manually move the throttle fully open position and check that it rotates regularly. Remove finger throttle (1) and make sure it returns to its preset position (open 7 (2) in relation to its fully closed position valve by rotating regularly under the combined action of the spring and the spring of opening). Manually move the throttle in the fully closed position and make sure it rotates regularly. Remove your finger and make sure it returns to its preset position. Go to step 2
the result of step 1
Replace the motorized throttle See: THROTTLE BODY WITH INTERGRAL MDS - RR (Info)
2 Check the manual operation of the motorized throttle Turn the key in the ON position in less than 5 seconds Gradually depress the accelerator pedal and check that the butterfly continues to rotate regularly until it is fully opened. Release the accelerator pedal and check that the throttle returns to its preset position.
the result of step 2 Proceed to Step 3
3 Control of the resistance of the throttle actuator Turn the key to OFF position Disconnect the throttle motor. Using the apparatus of Ford test mode ohmmeter, measure the resistance between terminals 3 and 5 of the throttle actuator and make sure that the resistance is about 2 ohms ± 10% at 20 ° C See: PETROL ENGINES ELECTRONIC MANAGEMENT (Content)
the result "of step 3
Replace the motorized throttle See: THROTTLE BODY WITH INTERGRAL MDS - RR (Info)
Commentaires
Enregistrer un commentaire